Polycom - KIRK IP

Below are all the different types of Polycom. Select the device of your choice, to download the manual

Contents

Polycom KIRK IP Interface Card User Guide 1 Introduction This guide helps you setting up the KIRK Wireless Server 1500 with IP Interface Card on a Cisco CallManager Please refer to your CallManager user manual for general information 2 Installation 1 Power down the WMS Wireless Mobility Server 2 Remove the top cover by unscrewing the screws on both sides of the WMS and the screws at the rear panel 3 Remove the blind cover plate in front of the slot closest to the power supply please refer to the figure at right 4 Insert the KIRK IP Interface Card into the slot 0 see drawing and mount the two screws from the blind cover 5 Put back the top cover 6 Connect an RJ45 cable not included between the KIRK IP Interface Card on the back of the ...